Forklift Training Program Whitby

Forklift Training Program Whitby - The lift truck is a common powered industrial vehicle which is in wide use nowadays. They are occasionally known as hi los, lift trucks or jitneys. A departments store will make use of the forklift to unload and load products, whereas warehouses would utilize them to stack materials and products. And grocery stores make use of small models to drop stock in the aisles. Whether loading material at a construction site or transporting lumber at a sawmill, operators of forklifts should be trained well and certified. The priority must be on the safety of the worker and pedestrian. This forklift training course teaches the safety and health regulations governing forklifts in order to ensure their efficient and safe use.

Forklift Training Program Safety Tips:

Forklift training courses are designed to ensure that the operator is able to safely control the forklift in lifting, tilting and traveling. Just qualified operators should operate a forklift.

Safety guidelines when traveling - head, hands, feet, legs and arms should be kept inside the forklift truck throughout traveling. The forks must be low to the ground and tilted back. Observe posted traffic signs. Decrease speed and honk the horn if taking a corner. If the driver's vision is blocked by the load, slowly drive backwards. Pre-inspect the ground for possible dangers, such as oily or wet spots, objects, rough patches, holes, vehicles and people. Avoid stopping suddenly.

When a vehicle or a person crosses the lift truck's blind spot, stop the truck, lower the load, and do not continue until the path is clear. When traveling on an incline, the forks must be pointed uphill with a load and downhill without a load. The forklift must only be turned around if on level ground.

Safety tips when steering - If traveling at good speeds, never turn the steering wheel sharply. Support the load utilizing the front wheels and turn using the back wheels. A truck which is overloaded would be hard to steer. Follow load restrictions. Do not add a counterweight as a way to improve steering.

Safety tips when loading - The forklift's suggested load capacities should be followed; the information can be found on the data plate. Always make certain that the load is positioned based on the suggested load centre. The lift truck would remain steady so long as the load is kept near the front wheels.

The mast of the forklift must be in an upright position before inserting the fork into a pallet. Before inserting the fork, level it.

Click to Download the pdf